Component Location
General Description
The TCM can either receive data from the Engine Control Module or ABS control module, or it can send data to the ECM and ABSCM by using CAN communication. The CAN communicaton is one of the vehicle communications method, which is now widely used to transfer the vehicle data.
DTC Description
When the TCM cannot read the data from the TGS sensor through the CAN-BUS line, the TCM sets this code.
DTC Detecting Condition
Item | Detecting Condition | Possible cause |
DTC Strategy | Check the signal
| Faulty in CAN Line
TGS Faulty in Sensor
Faulty in TCM
|
Enable Conditions | Battery voltage > 10V
Time passed from IG-On > 0.5sec
|
Threshold Value | Not Receive a message from CAN MI-COM
|
Diagnostic Time | More than 2seconds.
|
Fail Safe | Normal Driving
|