Follow us on Twitter and win Autohex II Scan Tool for Kia and Hyundai (worth 945.00 USD)

P2562 Turbocharger Boost Control Position Sensor "A" Circuit

AutoHex Online Help: Hyundai GENESIS COUPE(BK) 2012
Component Location
General Description

Turbo charger controlled by ECU is being applied recently. ECU calculates the optimized fuel ratio by measuring the accurate air mass from turbo charger.

If the boost pressure from intake manifold reaches target pressure value, ECU makes a part of exhaust gas bypass.

Concentrated mix gas makes much higher horse power in explosion cycle.



DTC Description

ECU shows DTC when wastegate sensor voltage at closed position is out of range.

DTC Detectiong Condition

Item

Detecting Condition

Possible Cause

DTC Strategy

Plausibility check

Check EWGA

Check W/G VALVE

Enable Conditions

Battery voltage is higher than 10v and lower than 16v.

Adaption of EWG is in condition.

Threshold Value

The wastegate sensor voltage at closed position adaptation is higher than 4.8v or lower than 3v.

Diagnostic Time

1sec

MIL On Condition

Two trips

Specification

DC - MOTOR(EWGA)

SUPPLY VOLTAGE RANGE

Max CURRENT

10 ~ 16V

8.5A

Diagnostic Circuit Diagram
Signal Waveform & Data